Dryer · Samsung

Samsung Dryer Won't Start: Child Lock, Door Codes and the Time Dry Test

Samsung dryer turns on but won't start, or won't power on at all? Check the display code, Child Lock and power, then run Samsung's own Time Dry start test.

Last verified November 16, 2026

Start here

Before you begin, make sure the dryer is plugged in and set up normally —child lock is on. it disables the start button, and it's the first thing samsung tells you to rule out.

Start troubleshooting

Safety notice

If you see burn marks or damage on the plug, cord or outlet, stop and call a licensed electrician. Samsung says these issues don't indicate the dryer is the cause.

View detailed safety tips

Most Likely Causes

Based on common issues for this problem.

  • 1Child Lock is on. It disables the Start button, and it's the first thing Samsung tells you to rule out
  • 2A door code (dC, dE, dF, do, d0) — the dryer doesn't detect the door as closed and secured
  • 3The cycle never actually started. Samsung's Time Dry test confirms this in a minute or two
  • 4No power reaching the dryer: a tripped or half-tripped breaker, or a cord or outlet problem
  • 5A stuck control-panel button (bE-family code)

Also described as: “Samsung dryer turns on but won't start”, “Samsung dryer has power but won't start”, “Samsung dryer buttons not working”, “Samsung dryer won't turn on”

Where to Start

First question: does the control panel light up? If it does, the dryer has power and something is stopping the cycle, usually Child Lock or a door code. If nothing lights up at all, skip to the power checks, because Child Lock and the start test can't help until the dryer has power.

Does the control panel light up when you press Power?

Yes, lights on

The dryer has power. Check the display for a code, turn off Child Lock, then run the Time Dry start test.

No, nothing lights up

No power is reaching the dryer. Check the cord, the outlet and the breaker (electric dryers can be half-tripped).

Steps, codes and timings sourced from Samsung's US support documentation (dryer won't start, Child Lock, power, error codes and reset pages). Reviewed November 16, 2026.

Safety Notes

  • If you see burn marks or damage on the plug, cord or outlet, stop and call a licensed electrician. Samsung says these issues don't indicate the dryer is the cause.
  • Don't unplug the dryer or switch off its power while the display shows dn. That means a firmware download is in progress.
  • If the breaker keeps tripping after you reset it, stop resetting it and call a licensed electrician.

If your Samsung dryer lights up but won’t start, the cause is usually something you can clear yourself: Child Lock, a door the dryer doesn’t detect as closed, or a cycle that never actually started. Samsung builds a quick start test into most models, so you can confirm which it is before calling for service. If nothing lights up at all, it’s a power problem, and the checks are different.

This page covers what’s specific to Samsung. For general part checks (door switch, thermal fuse, start switch and drive belt), see the main dryer won’t start guide. If it starts but runs cold, see the Samsung dryer not heating guide. More Samsung guides are on the Samsung brand page.

Diagnostic Steps

Your progress

0 of 5 steps checked

  1. Check the display for a code

    What to look for
    Any code or blinking lights on the control panel.
    What it indicates
    Per Samsung, a code or blinking lights means something may be preventing the dryer from starting, such as the door not being closed. Door codes (dC, dE, dF, do, d0, 1 DC, 1 dF) relate to the door, its latch, and the sensors that detect whether they're secured. A bE-family code means a button is detected as stuck or continuously pressed. CL means Child Lock is on.
    What to do
    Troubleshoot the code first — the Brand-Specific Info section below lists what Samsung says to do for each start-related code. For a door code: check the latch is securely fixed, nothing is caught in the door, and the door is closed and secured.
    If nothing changes
    If there's no code, or clearing it didn't help, check Child Lock.
  2. Turn off Child Lock

    What to look for
    A lit Child Lock icon. Depending on the model, it looks like a baby or a lock with a smiley face.
    What it indicates
    Child Lock stops the Start button from working. It also explains buttons that don't respond or a cycle knob that won't select a different cycle.
    What to do
    Press and hold the two Child Lock buttons together for 3 or more seconds. The exact pair varies by model and is usually labeled on the panel. Two common pairs are Temp + Time, and Dry Level + Temp. If the panel doesn't respond at all, turn Child Lock on and then off again. If the buttons still don't respond, unplug the dryer or switch off its breaker for 60 seconds, then restore power.
    If nothing changes
    If your dryer has a digital display with a timer, run the Time Dry start test next. If it has no digital display, skip to requesting service.
  3. Run Samsung's Time Dry start test

    What to look for
    Whether the timer counts down after you start a cycle.
    What it indicates
    This is Samsung's own check that the cycle actually started. If the timer counts down (for example, from 40 to 39 after a minute), the dryer started the cycle. If it doesn't count down after 1–2 minutes, the cycle never started, which is why the drum isn't spinning.
    What to do
    Select Time Dry, then touch and hold Start. Watch the timer. If it doesn't count down, verify the door is closed and Child Lock is off, then keep trying until the timer counts down, the drum begins to spin, or an error code appears.
    If nothing changes
    If the timer counts down but the drum doesn't spin, Samsung says service is usually required — the cycle is starting, so the problem isn't a setting.
  4. No lights at all: check the cord, outlet and breaker

    What to look for
    Damage or burn marks on the plug, cord or outlet, and the breaker position.
    What it indicates
    A dryer with no lights isn't getting power. Samsung treats this as a power-supply issue, not a Child Lock or start problem. On electric dryers, the power cord is installed onto the dryer, so a loose or incorrect cord connection can also cause it.
    What to do
    Switch off the breaker and unplug the dryer. Check the plug, cord and outlet for burn marks or damage. On an electric dryer, make sure the cord is correctly installed and not loose. Then switch the breaker fully off, wait 30 seconds, and switch it back on — a tripped breaker can look like it's on. Gas dryers use a 15 Amp circuit and a regular 3-prong outlet. Electric dryers use a two-part 30 Amp circuit and a 240-volt outlet; if it's half-tripped, switch both parts off for 30 seconds, then back on. On a gas dryer, test the outlet by plugging in a lamp or phone charger (skip this if the drum light comes on when you open the door, since that proves the outlet works).
    If nothing changes
    Call a licensed electrician if there are burn marks or damage, the cord connection looks loose or wrong, the outlet doesn't work, or the breaker keeps tripping. If power is fine and the dryer still won't turn on, request service.
  5. Reset the dryer, then request service

    What to look for
    Whether the dryer starts after a full power-down, and whether a code comes back.
    What it indicates
    A reset clears error codes from memory, but it doesn't fix the cause. Samsung recommends it only after you've worked through the troubleshooting above.
    What to do
    Unplug the dryer or switch off its breaker. Wait for the electrical charge to clear — Samsung says this is usually 1 to 5 minutes at most — then restore power and try again.
    If nothing changes
    If the dryer still won't start, or the same code comes back, request service from Samsung. Don't keep resetting it: clearing the error history makes it harder for a technician to diagnose the problem.

Brand-Specific Info

Error Codes

dC / dE / dF / do / d0 / 1 DC / 1 dF
Door-related. Check the latch is securely fixed, nothing is caught in the door, and the door is closed and secured. If the code won't clear or the door or latch is damaged, request service.
bE / bE2 / bC2 / 6E / 6E2 / 6C2
A button is detected as stuck or continuously pressed. Turn the dryer off, then touch and release each button one at a time, covering all its edges. If a button is damaged or the code returns after power-on, request service.
CL
Child Lock is on and the control panel's buttons are disabled. On some models, Child Lock may also lock the door.
9C1 / 9E / 2E / 9E1
Abnormal voltage supplied to the dryer. Make sure it's on its own circuit and not using an extension cord. If the code persists, request service.
dn
Firmware download in progress. Don't unplug or switch off power. The dryer restarts itself when it's done; if dn still shows after 24 hours, request service.

Child Lock is turned on and off by holding two buttons together for 3 or more seconds. The pair varies by model and is usually labeled on the panel; Temp + Time and Dry Level + Temp are two common pairs. To start a cycle for the Time Dry test, Samsung says to touch and hold Start rather than tap it. For codes not covered above, Samsung's general advice is to power the dryer off for 2–3 minutes, power it back on, and restart the cycle.

The Time Dry start test needs a digital display that shows the timer. If your Samsung dryer has no digital display, Samsung says to skip the test and request service once Child Lock and power are ruled out. The Child Lock icon also differs by model: a baby on some panels, a lock with a smiley face on others.

What Not to Do

  • Don't run the dryer on an extension cord. Samsung lists it as something to rule out for voltage codes (9C1, 9E, 2E, 9E1).
  • Don't keep resetting the dryer to clear a code that keeps coming back. Samsung warns that clearing the error history makes it harder for a technician to diagnose.
  • Don't unplug the dryer while dn is on the display — a firmware update is installing.

Frequently Asked Questions

Why won't my Samsung dryer start when I press Start?

Check Child Lock first. It disables the Start button, and its icon (a baby, or a lock with a smiley face) is lit when it's on. Hold the two labeled Child Lock buttons together for 3 or more seconds to turn it off. If there's a code on the display instead, such as dE or dC, the dryer doesn't detect the door as closed and secured.

How do I turn off Child Lock on a Samsung dryer?

Press and hold the two Child Lock buttons together for 3 or more seconds. The pair varies by model and is usually labeled on the control panel; Temp + Time and Dry Level + Temp are common. If the panel won't respond, unplug the dryer or switch off its breaker for 60 seconds, then try again.

My Samsung dryer turns on but the drum won't spin. Is it broken?

Run Samsung's start test first: select Time Dry, touch and hold Start, and watch the timer. If it doesn't count down after 1–2 minutes, the cycle never started, so check the door and Child Lock and try again. If the timer counts down but the drum still doesn't spin, Samsung says service is usually required.

What does dE mean on a Samsung dryer?

dE is one of Samsung's door-related codes, along with dC, dF, do, d0, 1 DC and 1 dF. Check that the latch is securely fixed, nothing is caught in the door, and the door is closed and secured. If the code won't clear or the door or latch is damaged, request service.

How do I reset a Samsung dryer?

Unplug it or switch off its breaker, wait for the electrical charge to clear (usually 1 to 5 minutes at most, per Samsung), then restore power. A reset clears codes but doesn't fix the cause, so do it after the other checks, and request service if the same code comes back.

My Samsung dryer starts but shuts off mid-cycle. Is that the same problem?

No. Samsung says a dryer can shut off as a safety measure when it detects a vent blockage. Run the Vent Blockage Test and clean the vent if it finds one — the Samsung dryer not heating guide covers the test and its result codes.

Related Problems